DBXRH-8585C-VTM
4-port sector antenna, 2x 698–960 and 2x 1710–2180 MHz, 85° HPBW, RET compatible
Specifications
Features and Benefits
- Patented dipole technology
- The RF connectors are designed for IP67 rating and the radome for IP56 rating
Specifications
General Specifications
| Antenna Type | Sector |
| Band | Multiband |
| Color | Light Gray (RAL 7035) |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN |
| Radome Material | Fiberglass, UV resistant |
| Radiator Material | Brass | Low loss circuit board |
| RF Connector Interface | 7-16 DIN Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, high band | 2 |
| RF Connector Quantity, mid band | 0 |
| RF Connector Quantity, low band | 2 |
| RF Connector Quantity, total | 4 |
Dimensions
| Width | 301 mm | 11.85 in |
| Depth | 181 mm | 7.126 in |
| Length | 2449 mm | 96.417 in |
| Net Weight, without mounting kit | 21.9 kg | 48.281 lb |
Array Layout
| Click on image to enlarge. |
Electrical Specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 698 – 960 MHz | 1710 – 2180 MHz |
| Polarization | ±45° |
Electrical Specifications
| Frequency Band, MHz | 698–806 | 806–896 | 870–960 | 1710–1880 | 1850–1990 | 1920–2180 |
| Gain, dBi | 15.1 | 15.0 | 16.2 | 17.0 | 16.7 | 17.1 |
| Beamwidth, Horizontal, degrees | 89 | 83 | 84 | 79 | 82 | 85 |
| Beamwidth, Vertical, degrees | 8.5 | 7.6 | 7.3 | 4.7 | 4.4 | 4.2 |
| Beam Tilt, degrees | 0–11 | 0–11 | 0–11 | 0–6 | 0–6 | 0–6 |
| USLS (First Lobe), dB | 15 | 15 | 15 | 16 | 17 | 17 |
| Front-to-Back Ratio at 180°, dB | 30 | 28 | 28 | 29 | 29 | 29 |
| CPR at Boresight, dB | 25 | 22 | 21 | 20 | 20 | 20 |
| CPR at Sector, dB | 13 | 11 | 10 | 9 | 9 | 10 |
| Isolation, Cross Polarization, dB | 30 | 30 | 30 | 30 | 30 | 30 |
| Isolation, Inter-band, dB | 30 | 30 | 30 | 30 | 30 | 30 |
| VSWR | Return loss, dB | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 |
| PIM, 3rd Order, 2 x 20 W, dBc | -150 | -150 | -150 | -150 | -150 | -150 |
| Input Power per Port, maximum, watts | 400 | 400 | 400 | 300 | 300 | 300 |
Mechanical Specifications
| Wind Loading @ Velocity, frontal | 396.0 N @ 150 km/h (89.0 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 333.0 N @ 150 km/h (74.9 lbf @ 150 km/h) |
| Wind Loading @ Velocity, maximum | 762.0 N @ 150 km/h (171.3 lbf @ 150 km/h) |
| Wind Loading @ Velocity, rear | 401.0 N @ 150 km/h (90.1 lbf @ 150 km/h) |
| Wind Speed, maximum | 241 km/h (150 mph) |
Packaging and Weights
| Width, packed | 410 mm | 16.142 in |
| Depth, packed | 295 mm | 11.614 in |
| Length, packed | 2765 mm | 108.858 in |
| Weight, gross | 35.7 kg | 78.705 lb |
Regulatory Compliance/Certifications
| Agency | Classification |
CE
|
Compliant with the relevant CE product directives |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
| ROHS | Compliant |
CHINA-ROHS
|
Below maximum concentration value |
| REACH-SVHC | Compliant as per SVHC revision on www.commscope.com/ProductCompliance |
| UK-ROHS | Compliant |
General Specifications
| Antenna Type | Sector |
| Band | Multiband |
| Color | Light Gray (RAL 7035) |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN |
| Radome Material | Fiberglass, UV resistant |
| Radiator Material | Brass | Low loss circuit board |
| RF Connector Interface | 7-16 DIN Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, high band | 2 |
| RF Connector Quantity, mid band | 0 |
| RF Connector Quantity, low band | 2 |
| RF Connector Quantity, total | 4 |
Dimensions
| Width | 301 mm | 11.85 in |
| Depth | 181 mm | 7.126 in |
| Length | 2449 mm | 96.417 in |
| Net Weight, without mounting kit | 21.9 kg | 48.281 lb |
Electrical Specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 698 – 960 MHz | 1710 – 2180 MHz |
| Polarization | ±45° |
Electrical Specifications
| Frequency Band, MHz | 698–806 | 806–896 | 870–960 | 1710–1880 | 1850–1990 | 1920–2180 |
| Gain, dBi | 15.1 | 15.0 | 16.2 | 17.0 | 16.7 | 17.1 |
| Beamwidth, Horizontal, degrees | 89 | 83 | 84 | 79 | 82 | 85 |
| Beamwidth, Vertical, degrees | 8.5 | 7.6 | 7.3 | 4.7 | 4.4 | 4.2 |
| Beam Tilt, degrees | 0–11 | 0–11 | 0–11 | 0–6 | 0–6 | 0–6 |
| USLS (First Lobe), dB | 15 | 15 | 15 | 16 | 17 | 17 |
| Front-to-Back Ratio at 180°, dB | 30 | 28 | 28 | 29 | 29 | 29 |
| CPR at Boresight, dB | 25 | 22 | 21 | 20 | 20 | 20 |
| CPR at Sector, dB | 13 | 11 | 10 | 9 | 9 | 10 |
| Isolation, Cross Polarization, dB | 30 | 30 | 30 | 30 | 30 | 30 |
| Isolation, Inter-band, dB | 30 | 30 | 30 | 30 | 30 | 30 |
| VSWR | Return loss, dB | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 |
| PIM, 3rd Order, 2 x 20 W, dBc | -150 | -150 | -150 | -150 | -150 | -150 |
| Input Power per Port, maximum, watts | 400 | 400 | 400 | 300 | 300 | 300 |
Mechanical Specifications
| Wind Loading @ Velocity, frontal | 396.0 N @ 150 km/h (89.0 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 333.0 N @ 150 km/h (74.9 lbf @ 150 km/h) |
| Wind Loading @ Velocity, maximum | 762.0 N @ 150 km/h (171.3 lbf @ 150 km/h) |
| Wind Loading @ Velocity, rear | 401.0 N @ 150 km/h (90.1 lbf @ 150 km/h) |
| Wind Speed, maximum | 241 km/h (150 mph) |
Packaging and Weights
| Width, packed | 410 mm | 16.142 in |
| Depth, packed | 295 mm | 11.614 in |
| Length, packed | 2765 mm | 108.858 in |
| Weight, gross | 35.7 kg | 78.705 lb |
| Click on image to enlarge. |
Regulatory Compliance/Certifications
| Agency | Classification |
|
CE
|
Compliant with the relevant CE product directives |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
| ROHS | Compliant |
|
CHINA-ROHS
|
Below maximum concentration value |
| REACH-SVHC | Compliant as per SVHC revision on www.commscope.com/ProductCompliance |
| UK-ROHS | Compliant |
Documentation & Downloads
Assembly Drawing
Installation Instruction
Product Information
Product Specification
Warranty
Assembly Drawing
Installation Instruction
Product Compliance Documentation
Product Information
Product Specification
Warranty
Related Products and Accessories
Included Products
Antennas
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Structural Support, Tools & Accessories
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Related Products
Antennas
-
![]()
ATM200-A20 Actuator, AISG 2.0 default protocol
Included Products
Antennas
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Structural Support, Tools & Accessories
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Related Products
Antennas
-
![]()
ATM200-A20 Actuator, AISG 2.0 default protocol
Other Ways to Browse
