For other alternatives, please contact us for more information.

0 Alternative products available

E14R00P56

Dual Band Tower Mounted Amplifier, 1800//2100 MHz, 12 dB, 2 BTS & 4 ANT ports, AISG with 1 RET connectors (1 devices with 2 sub-units each)

Find a Partner

Specifications

Finish making your selections or clear them to view relevant specifications.

Download

Features and Benefits

Industry leading PIM performance
TMA is operating in AISG & CWA mode, Alarm Current consumption CWA mode 190 mA
2 input ports and 4 output ports
Designed to boost UP-Link Coverage and KPIs
1 device with 2 sub-units
New 4.3-10 connectors for improved PIM performance and size reduction

Specifications

Product Classification

Product Type

2-BTS:4-ANT (Diplex) | Tower mounted amplifier

General Specifications

Color	Gray
Modularity	2-Twin
Mounting	Pole \| Wall
Mounting Pipe Hardware	Band clamps (2)
RF Connector Interface	4.3-10 Female

Dimensions

Height	215 mm \| 8.465 in
Width	245 mm \| 9.646 in
Depth	88 mm \| 3.465 in
Mounting Pipe Diameter Range	43–122 mm

Outline Drawing

Click on image to enlarge.

Electrical Specifications

License Band, LNA

DCS 1800 | IMT 2100

Electrical Specifications, dc Power/Alarm

Lightning Surge Current	10 kA
Lightning Surge Current Waveform	8/20 waveform
Voltage	7–30 Vdc

Electrical Specifications, AISG

AISG Connector	8-pin DIN Female
AISG Connector Standard	IEC 60130-9
Protocol	AISG 2.0
Voltage, AISG Mode	10–30 Vdc

Electrical Specifications

Sub-module	1 \| 2	1 \| 2
Branch	1	2
Port Designation	ANT 1800	ANT 2100
License Band	DCS 1800, LNA	IMT 2100, LNA

Electrical Specifications, Rx Uplink

Frequency Range, MHz	1710–1785	1920–1980
Bandwidth, MHz	75.00	60.00
Gain, nominal, dB	12.0	12.0
Gain Tolerance, dB	+1.4/-1.0	±1
Noise Figure, typical, dB	1.7	1.6
Group Delay Variation, maximum, ns	50	30
Group Delay Variation Bandwidth, MHz	5.00	5.00
Total Group Delay, maximum, ns	130	100
Return Loss, minimum, dB	16	16
Insertion Loss - Bypass Mode, typical, dB	2.5	2.3
Return Loss - Bypass Mode, typical, dB	16	16

Electrical Specifications, Tx Downlink

Frequency Range, MHz	1805–1880	2110–2170
Bandwidth, MHz	75.00	60.00
Insertion Loss, maximum, dB	0.70	0.40
Insertion Loss, typical, dB	0.50	0.30
Group Delay Variation, maximum, ns	20	10
Group Delay Variation Bandwidth, MHz	5.00	5.00
Total Group Delay, maximum, ns	50	25
Return Loss, minimum, dB	18	18
Input Power, RMS, maximum, W	200	200
Input Power, PEP, maximum, W	1,000	1,000
3rd Order PIM, typical, dBc	-160	-162
3rd Order PIM Test Method	Two +43 dBm carriers	Two +43 dBm carriers

Block Diagram

Click on image to enlarge.

Environmental Specifications

Operating Temperature	-40 °C to +65 °C (-40 °F to +149 °F)
Relative Humidity	Up to 100%
Corrosion Test Method	IEC 60068-2-11, 30 days
Environmental Test Method	ETSI EN 300 019-1-4
Ingress Protection Test Method	IEC 60529:2001, IP67

Packaging and Weights

Included	Mounting hardware
Volume	4.6 L
Weight, net	7.1 kg \| 15.653 lb
Weight, without mounting hardware	6.6 kg \| 14.550 lb

Product Classification

Product Type

2-BTS:4-ANT (Diplex) | Tower mounted amplifier

General Specifications

Color	Gray
Modularity	2-Twin
Mounting	Pole \| Wall
Mounting Pipe Hardware	Band clamps (2)
RF Connector Interface	4.3-10 Female

Dimensions

Height	215 mm \| 8.465 in
Width	245 mm \| 9.646 in
Depth	88 mm \| 3.465 in
Mounting Pipe Diameter Range	43–122 mm

Electrical Specifications

License Band, LNA

DCS 1800 | IMT 2100

Electrical Specifications, dc Power/Alarm

Lightning Surge Current	10 kA
Lightning Surge Current Waveform	8/20 waveform
Voltage	7–30 Vdc

Electrical Specifications, AISG

AISG Connector	8-pin DIN Female
AISG Connector Standard	IEC 60130-9
Protocol	AISG 2.0
Voltage, AISG Mode	10–30 Vdc

Electrical Specifications

Sub-module	1 \| 2	1 \| 2
Branch	1	2
Port Designation	ANT 1800	ANT 2100
License Band	DCS 1800, LNA	IMT 2100, LNA

Electrical Specifications, Rx Uplink

Frequency Range, MHz	1710–1785	1920–1980
Bandwidth, MHz	75.00	60.00
Gain, nominal, dB	12.0	12.0
Gain Tolerance, dB	+1.4/-1.0	±1
Noise Figure, typical, dB	1.7	1.6
Group Delay Variation, maximum, ns	50	30
Group Delay Variation Bandwidth, MHz	5.00	5.00
Total Group Delay, maximum, ns	130	100
Return Loss, minimum, dB	16	16
Insertion Loss - Bypass Mode, typical, dB	2.5	2.3
Return Loss - Bypass Mode, typical, dB	16	16

Electrical Specifications, Tx Downlink

Frequency Range, MHz	1805–1880	2110–2170
Bandwidth, MHz	75.00	60.00
Insertion Loss, maximum, dB	0.70	0.40
Insertion Loss, typical, dB	0.50	0.30
Group Delay Variation, maximum, ns	20	10
Group Delay Variation Bandwidth, MHz	5.00	5.00
Total Group Delay, maximum, ns	50	25
Return Loss, minimum, dB	18	18
Input Power, RMS, maximum, W	200	200
Input Power, PEP, maximum, W	1,000	1,000
3rd Order PIM, typical, dBc	-160	-162
3rd Order PIM Test Method	Two +43 dBm carriers	Two +43 dBm carriers

Environmental Specifications

Operating Temperature	-40 °C to +65 °C (-40 °F to +149 °F)
Relative Humidity	Up to 100%
Corrosion Test Method	IEC 60068-2-11, 30 days
Environmental Test Method	ETSI EN 300 019-1-4
Ingress Protection Test Method	IEC 60529:2001, IP67