1. Startseite
  2. Netzwerktyp
  3. Makrostandorte im Außenbereich
  4. Antennen und RET-Ausrüstung für Basisstationen
  5. Antennen für die Basisstation
  6. Mehrstrahlantennen
  7. J4H4-65C-R6
Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

J4H4-65C-R6

16-port, low band diplexed antenna, 4 x 698-728 MHz, 4 x 758-798 MHz and 8 x 1695-2360 MHz, 65° HPBW, 6 x RET

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Excellent wind loading characteristics
  • Optimized SPR performance across all operating bands
  • Features broadband Low Band (698-798 MHz) and Mid Band (1695-2360 MHz) arrays for 4T4R (4X MIMO) capability for B29 and B14, AWS, PCS and WCS applications
  • Both Low Band arrays are diplexed to provide independent tilt for B29 and B14

General Specifications

Antenna Type Sector
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, mid band 8
RF Connector Quantity, low band 8
RF Connector Quantity, total 16

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 female | 2 male
Input Voltage 10–30 Vdc
Internal RET Low band (2) | Mid band (4)
Power Consumption, active state, maximum 8 W
Power Consumption, idle state, maximum 1 W
Protocol 3GPP/AISG 2.0 (Multi-RET)

Dimensions

Width 498 mm | 19.606 in
Depth 197 mm | 7.756 in
Length 2438 mm | 95.984 in
Net Weight, antenna only 57.4 kg | 126.545 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 698 – 798 MHz | 1695 – 2360 MHz
Polarization ±45°
Total Input Power, maximum 1,280 W @ 50 °C

Electrical Specifications

R1,R3 R2,R4 Y1-Y4 Y1-Y4 Y1-Y4 Y1-Y4
Frequency Band, MHz 698–728 758–798 1695–1880 1850–1990 1920–2180 2300–2360
RF Port 1,2,5,6 3,4,7,8 9-16 9-16 9-16 9-16
Gain, dBi 14.7 15.1 17.4 18.0 18.6 18.7
Beamwidth, Horizontal, degrees 61 57 69 67 62 58
Beamwidth, Vertical, degrees 9.7 8.9 5.7 5.3 5 4.4
Beam Tilt, degrees 0–10 0–10 0–10 0–10 0–10 0–10
USLS (First Lobe), dB 19 19 18 19 19 20
Front-to-Back Ratio at 180°, dB 33 31 35 36 34 36
Front-to-Back Total Power at 180° ± 30°, dB 22 23 27 27 26 28
Isolation, Cross Polarization, dB 25 25 25 25 25 25
Isolation, Inter-band, dB 25 25 25 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 150 150 250 250 250 200

Electrical Specifications, BASTA

Frequency Band, MHz 698–728 758–798 1695–1880 1850–1990 1920–2180 2300–2360
Gain by all Beam Tilts, average, dBi 14.5 14.8 16.9 17.6 18.2 18.5
Gain by all Beam Tilts Tolerance, dB ±0.4 ±0.3 ±0.7 ±0.6 ±0.7 ±0.5
Beamwidth, Horizontal Tolerance, degrees ±6 ±3 ±8 ±8 ±7 ±4
Beamwidth, Vertical Tolerance, degrees ±0.3 ±0.4 ±0.3 ±0.3 ±0.4 ±0.3
USLS, beampeak to 20° above beampeak, dB 18 17 15 17 17 17
CPR at Boresight, dB 21 22 21 23 23 21
CPR at Sector, dB 12 10 8 8 7 9

Mechanical Specifications

Wind Loading @ Velocity, frontal 865.0 N @ 150 km/h (194.5 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 268.0 N @ 150 km/h (60.2 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,037.0 N @ 150 km/h (233.1 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 595.0 N @ 150 km/h (133.8 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 565 mm | 22.244 in
Depth, packed 309 mm | 12.165 in
Length, packed 2685 mm | 105.709 in
Weight, gross 78.3 kg | 172.622 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

General Specifications

Antenna Type Sector
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, mid band 8
RF Connector Quantity, low band 8
RF Connector Quantity, total 16

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 female | 2 male
Input Voltage 10–30 Vdc
Internal RET Low band (2) | Mid band (4)
Power Consumption, active state, maximum 8 W
Power Consumption, idle state, maximum 1 W
Protocol 3GPP/AISG 2.0 (Multi-RET)

Dimensions

Width 498 mm | 19.606 in
Depth 197 mm | 7.756 in
Length 2438 mm | 95.984 in
Net Weight, antenna only 57.4 kg | 126.545 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 698 – 798 MHz | 1695 – 2360 MHz
Polarization ±45°
Total Input Power, maximum 1,280 W @ 50 °C

Electrical Specifications

R1,R3 R2,R4 Y1-Y4 Y1-Y4 Y1-Y4 Y1-Y4
Frequency Band, MHz 698–728 758–798 1695–1880 1850–1990 1920–2180 2300–2360
RF Port 1,2,5,6 3,4,7,8 9-16 9-16 9-16 9-16
Gain, dBi 14.7 15.1 17.4 18.0 18.6 18.7
Beamwidth, Horizontal, degrees 61 57 69 67 62 58
Beamwidth, Vertical, degrees 9.7 8.9 5.7 5.3 5 4.4
Beam Tilt, degrees 0–10 0–10 0–10 0–10 0–10 0–10
USLS (First Lobe), dB 19 19 18 19 19 20
Front-to-Back Ratio at 180°, dB 33 31 35 36 34 36
Front-to-Back Total Power at 180° ± 30°, dB 22 23 27 27 26 28
Isolation, Cross Polarization, dB 25 25 25 25 25 25
Isolation, Inter-band, dB 25 25 25 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 150 150 250 250 250 200

Electrical Specifications, BASTA

Frequency Band, MHz 698–728 758–798 1695–1880 1850–1990 1920–2180 2300–2360
Gain by all Beam Tilts, average, dBi 14.5 14.8 16.9 17.6 18.2 18.5
Gain by all Beam Tilts Tolerance, dB ±0.4 ±0.3 ±0.7 ±0.6 ±0.7 ±0.5
Beamwidth, Horizontal Tolerance, degrees ±6 ±3 ±8 ±8 ±7 ±4
Beamwidth, Vertical Tolerance, degrees ±0.3 ±0.4 ±0.3 ±0.3 ±0.4 ±0.3
USLS, beampeak to 20° above beampeak, dB 18 17 15 17 17 17
CPR at Boresight, dB 21 22 21 23 23 21
CPR at Sector, dB 12 10 8 8 7 9

Mechanical Specifications

Wind Loading @ Velocity, frontal 865.0 N @ 150 km/h (194.5 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 268.0 N @ 150 km/h (60.2 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,037.0 N @ 150 km/h (233.1 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 595.0 N @ 150 km/h (133.8 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 565 mm | 22.244 in
Depth, packed 309 mm | 12.165 in
Length, packed 2685 mm | 105.709 in
Weight, gross 78.3 kg | 172.622 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

Assembly Drawing

Outline Drawing

Installation Instruction

639840 Mounting Kits For Wide Panel Antennas

Product Compliance Documentation

Global Trade Data
Statement of Compliance RoHS/REACH

Product Information

Antenna Patterns | (login required)

Product Specification

J4H4-65C-R6 Product specifications
J4H4-65C-R6 Product specifications (Comprehensive)

Warranty

CommScope Limited Product Warranty

Assembly Drawing

Outline Drawing

Installation Instruction

639840 Mounting Kits For Wide Panel Antennas

Product Compliance Documentation

Global Trade Data
Statement of Compliance RoHS/REACH

Product Information

Antenna Patterns | (login required)

Product Specification

J4H4-65C-R6 Product specifications
J4H4-65C-R6 Product specifications (Comprehensive)

Warranty

CommScope Limited Product Warranty