E15Z09P94
Tower Mounted Amplifier, Twin Diplexed AWS/700–750 Bypass with AISG
Specifications
Specifications
Product Classification
| Product Type | 1-BTS:2-ANT (Diplex) | Tower mounted amplifier |
General Specifications
| Color | Gray |
| Modularity | 2-Twin |
| Mounting | Pole | Wall |
| Mounting Pipe Hardware | Band clamps (2) |
| RF Connector Interface | 7-16 DIN Female |
| RF Connector Interface Body Style | Long neck |
Dimensions
| Height | 220 mm | 8.661 in |
| Width | 155 mm | 6.102 in |
| Depth | 108 mm | 4.252 in |
| Ground Screw Diameter | 6 mm | 0.236 in |
| Mounting Pipe Diameter Range | 40–160 mm |
Outline Drawing
| Click on image to enlarge. |
Electrical Specifications
| License Band, Band Pass | APT 700 | LMR 750 | USA 700 | USA 750 |
| License Band, LNA | AWS 1700 |
Electrical Specifications, dc Power/Alarm
| dc Switching/Redundancy | No |
| Lightning Surge Current | 5 kA |
| Lightning Surge Current Waveform | 8/20 waveform |
| Operating Current at Voltage | 135 mA @ 12 V | 75 mA @ 24 V |
| Operating Current Tolerance | ±15 mA |
| Voltage | 7–30 Vdc |
| Voltage, CWA Mode | 10–18 Vdc |
| Alarm Current, CWA Mode | 180–200 mA @ 10–18 V |
Electrical Specifications, AISG
| AISG Carrier | 2.176 MHz ± 100 ppm |
| AISG Connector | 8-pin DIN Female |
| AISG Connector Standard | IEC 60130-9 |
| Default Protocol | AISG 2.0 |
| Protocol | AISG 1.1 | AISG 2.0 |
| Voltage, AISG Mode | 10–30 Vdc |
Electrical Specifications
| Sub-module | 1 | 2 | 1 | 2 |
| Branch | 1 | 2 |
| Port Designation | 698–805 | AWS ANT |
| License Band | APT 700, Band Pass LMR 750, Band Pass USA 700, Band Pass USA 750, Band Pass | AWS 1700, LNA |
Electrical Specifications, Band Pass
| Frequency Range, MHz | 698–805 | |
| Insertion Loss, maximum, dB | 0.30 | |
| Return Loss, minimum, dB | 22 | |
| Input Power, RMS, maximum, W | 500 | |
| Input Power, PEP, maximum, W | 5,000 | |
| 3rd Order PIM, typical, dBc | -153 | |
| 3rd Order PIM Test Method | 2 x 20 W CW tones | |
| Higher Order PIM, typical, dBc | -153 | |
| Higher Order PIM Test Method | 1 x 20 W AWS CW tone 1 x 20 W PCS CW tone |
Electrical Specifications, Rx Uplink
| Frequency Range, MHz | 1710–1770 | |
| Bandwidth, MHz | 60.00 | |
| Gain, nominal, dB | 13.0 | |
| Gain Tolerance, dB | ±1.0 | |
| Noise Figure, typical, dB | 1.3 | |
| Output IP3, minimum, dBm | 25 | |
| Return Loss, minimum, dB | 18 | |
| Insertion Loss - Bypass Mode, typical, dB | 1.5 |
Electrical Specifications, Tx Downlink
| Frequency Range, MHz | 2110–2170 | |
| Bandwidth, MHz | 60.00 | |
| Insertion Loss, typical, dB | 0.30 | |
| Return Loss, minimum, dB | 20 | |
| Input Power, RMS, maximum, W | 500 | |
| Input Power, PEP, maximum, W | 5,000 |
Block Diagram
| Click on image to enlarge. |
Material Specifications
| Finish | Painted |
Mechanical Specifications
| Wind Loading @ Velocity, maximum | 33.0 N @ 115 km/h (7.4 lbf @ 115 km/h) |
Environmental Specifications
| Operating Temperature | -40 °C to +65 °C (-40 °F to +149 °F) |
| Relative Humidity | Up to 100% |
| Corrosion Test Method | IEC 60068-2-11, 30 days |
| Ingress Protection Test Method | IEC 60529:2001, IP67 |
Packaging and Weights
| Included | Mounting hardware |
| Weight, net | 5.4 kg | 11.905 lb |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
Product Classification
| Product Type | 1-BTS:2-ANT (Diplex) | Tower mounted amplifier |
General Specifications
| Color | Gray |
| Modularity | 2-Twin |
| Mounting | Pole | Wall |
| Mounting Pipe Hardware | Band clamps (2) |
| RF Connector Interface | 7-16 DIN Female |
| RF Connector Interface Body Style | Long neck |
Dimensions
| Height | 220 mm | 8.661 in |
| Width | 155 mm | 6.102 in |
| Depth | 108 mm | 4.252 in |
| Ground Screw Diameter | 6 mm | 0.236 in |
| Mounting Pipe Diameter Range | 40–160 mm |
Electrical Specifications
| License Band, Band Pass | APT 700 | LMR 750 | USA 700 | USA 750 |
| License Band, LNA | AWS 1700 |
Electrical Specifications, dc Power/Alarm
| dc Switching/Redundancy | No |
| Lightning Surge Current | 5 kA |
| Lightning Surge Current Waveform | 8/20 waveform |
| Operating Current at Voltage | 135 mA @ 12 V | 75 mA @ 24 V |
| Operating Current Tolerance | ±15 mA |
| Voltage | 7–30 Vdc |
| Voltage, CWA Mode | 10–18 Vdc |
| Alarm Current, CWA Mode | 180–200 mA @ 10–18 V |
Electrical Specifications, AISG
| AISG Carrier | 2.176 MHz ± 100 ppm |
| AISG Connector | 8-pin DIN Female |
| AISG Connector Standard | IEC 60130-9 |
| Default Protocol | AISG 2.0 |
| Protocol | AISG 1.1 | AISG 2.0 |
| Voltage, AISG Mode | 10–30 Vdc |
Electrical Specifications
| Sub-module | 1 | 2 | 1 | 2 |
| Branch | 1 | 2 |
| Port Designation | 698–805 | AWS ANT |
| License Band | APT 700, Band Pass; LMR 750, Band Pass; USA 700, Band Pass; USA 750, Band Pass | AWS 1700, LNA |
Electrical Specifications, Band Pass
| Frequency Range, MHz | 698–805 | |
| Insertion Loss, maximum, dB | 0.30 | |
| Return Loss, minimum, dB | 22 | |
| Input Power, RMS, maximum, W | 500 | |
| Input Power, PEP, maximum, W | 5,000 | |
| 3rd Order PIM, typical, dBc | -153 | |
| 3rd Order PIM Test Method | 2 x 20 W CW tones | |
| Higher Order PIM, typical, dBc | -153 | |
| Higher Order PIM Test Method | 1 x 20 W AWS CW tone; 1 x 20 W PCS CW tone |
Electrical Specifications, Rx Uplink
| Frequency Range, MHz | 1710–1770 | |
| Bandwidth, MHz | 60.00 | |
| Gain, nominal, dB | 13.0 | |
| Gain Tolerance, dB | ±1.0 | |
| Noise Figure, typical, dB | 1.3 | |
| Output IP3, minimum, dBm | 25 | |
| Return Loss, minimum, dB | 18 | |
| Insertion Loss - Bypass Mode, typical, dB | 1.5 |
Electrical Specifications, Tx Downlink
| Frequency Range, MHz | 2110–2170 | |
| Bandwidth, MHz | 60.00 | |
| Insertion Loss, typical, dB | 0.30 | |
| Return Loss, minimum, dB | 20 | |
| Input Power, RMS, maximum, W | 500 | |
| Input Power, PEP, maximum, W | 5,000 |
Material Specifications
| Finish | Painted |
Mechanical Specifications
| Wind Loading @ Velocity, maximum | 33.0 N @ 115 km/h (7.4 lbf @ 115 km/h) |
Environmental Specifications
| Operating Temperature | -40 °C to +65 °C (-40 °F to +149 °F) |
| Relative Humidity | Up to 100% |
| Corrosion Test Method | IEC 60068-2-11, 30 days |
| Ingress Protection Test Method | IEC 60529:2001, IP67 |
Packaging and Weights
| Included | Mounting hardware |
| Weight, net | 5.4 kg | 11.905 lb |
| Click on image to enlarge. |
| Click on image to enlarge. |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
Documentation & Downloads
Installation Instruction
Product Specification
Video
Filter Products – Designed for PIM Excellence
Filter Products – Designed for PIM Excellence
Warranty
Installation Instruction
Product Compliance Documentation
Product Specification
Video
Filter Products – Designed for PIM Excellence
Filter Products – Designed for PIM Excellence
Warranty
Other Ways to Browse
