E15R02P35
Dual Band Tower Mounted Amplifier, 800//900 MHz (791-862//880-960 MHz), 12 dB, 2 ANT & 2 BTS ports, AISG with 1 RET connector (2 devices with 2 sub-units each)
Specifications
Specifications
Product Classification
| Product Type | 1-BTS:1-ANT (Uniplex) | Tower mounted amplifier |
General Specifications
| Color | Gray |
| Modularity | 2-Twin |
| Mounting | Pole | Wall |
| Mounting Pipe Hardware | Band clamps (2) |
| RF Connector Interface | 7-16 DIN Female |
Dimensions
| Height | 375 mm | 14.764 in |
| Width | 199 mm | 7.835 in |
| Depth | 150 mm | 5.906 in |
| Mounting Pipe Diameter Range | 50–120 mm |
Outline Drawing
| Click on image to enlarge. |
Electrical Specifications
| License Band, LNA | CEL 900 | EDD 800 |
Electrical Specifications, dc Power/Alarm
| dc Switching/Redundancy | Yes |
| Lightning Surge Current | 10 kA |
| Lightning Surge Current Waveform | 8/20 waveform |
| Voltage | 7–30 Vdc |
| Alarm Current, CWA Mode | 250 mA ±10 mA |
Electrical Specifications, AISG
| AISG Connector | 8-pin DIN Female |
| AISG Connector Standard | IEC 60130-9 |
| Protocol | AISG 2.0 |
| Voltage, AISG Mode | 10–30 Vdc |
Electrical Specifications
| Sub-module | 1 | 2 | 1 | 2 |
| Branch | 1 | 1 |
| Port Designation | ANT | ANT |
| License Band | EDD 800, LNA | CEL 900, LNA |
Electrical Specifications, Rx Uplink
| Frequency Range, MHz | 832–862 | 880–915 |
| Bandwidth, MHz | 30.00 | 35.00 |
| Gain, nominal, dB | 12.0 | 12.0 |
| Noise Figure, typical, dB | 1.3 | 1.4 |
| Group Delay Variation, maximum, ns | 120 | 105 |
| Group Delay Variation Bandwidth, MHz | 5.00 | 5.00 |
| Return Loss, minimum, dB | 18 | 18 |
Electrical Specifications, Tx Downlink
| Frequency Range, MHz | 791–821 | 925–960 |
| Bandwidth, MHz | 30.00 | 35.00 |
| Insertion Loss, typical, dB | 0.60 | 0.60 |
| Group Delay Variation, maximum, ns | 30 | 30 |
| Group Delay Variation Bandwidth, MHz | 5.00 | 5.00 |
| Return Loss, minimum, dB | 18 | 18 |
| Input Power, RMS, maximum, W | 200 | 200 |
| Input Power, PEP, maximum, W | 2,000 | 2,000 |
| 3rd Order PIM, maximum, dBc | -153 | -153 |
| 3rd Order PIM Test Method | Two +43 dBm carriers | Two +43 dBm carriers |
Block Diagram
| Click on image to enlarge. |
Environmental Specifications
| Operating Temperature | -40 °C to +65 °C (-40 °F to +149 °F) |
| Relative Humidity | Up to 100% |
| Corrosion Test Method | IEC 60068-2-11, 30 days |
| Ingress Protection Test Method | IEC 60529:2001, IP67 |
Packaging and Weights
| Included | Mounting hardware |
| Volume | 11.2 L |
| Weight, net | 11.8 kg | 26.015 lb |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
Product Classification
| Product Type | 1-BTS:1-ANT (Uniplex) | Tower mounted amplifier |
General Specifications
| Color | Gray |
| Modularity | 2-Twin |
| Mounting | Pole | Wall |
| Mounting Pipe Hardware | Band clamps (2) |
| RF Connector Interface | 7-16 DIN Female |
Dimensions
| Height | 375 mm | 14.764 in |
| Width | 199 mm | 7.835 in |
| Depth | 150 mm | 5.906 in |
| Mounting Pipe Diameter Range | 50–120 mm |
Electrical Specifications
| License Band, LNA | CEL 900 | EDD 800 |
Electrical Specifications, dc Power/Alarm
| dc Switching/Redundancy | Yes |
| Lightning Surge Current | 10 kA |
| Lightning Surge Current Waveform | 8/20 waveform |
| Voltage | 7–30 Vdc |
| Alarm Current, CWA Mode | 250 mA ±10 mA |
Electrical Specifications, AISG
| AISG Connector | 8-pin DIN Female |
| AISG Connector Standard | IEC 60130-9 |
| Protocol | AISG 2.0 |
| Voltage, AISG Mode | 10–30 Vdc |
Electrical Specifications
| Sub-module | 1 | 2 | 1 | 2 |
| Branch | 1 | 1 |
| Port Designation | ANT | ANT |
| License Band | EDD 800, LNA | CEL 900, LNA |
Electrical Specifications, Rx Uplink
| Frequency Range, MHz | 832–862 | 880–915 |
| Bandwidth, MHz | 30.00 | 35.00 |
| Gain, nominal, dB | 12.0 | 12.0 |
| Noise Figure, typical, dB | 1.3 | 1.4 |
| Group Delay Variation, maximum, ns | 120 | 105 |
| Group Delay Variation Bandwidth, MHz | 5.00 | 5.00 |
| Return Loss, minimum, dB | 18 | 18 |
Electrical Specifications, Tx Downlink
| Frequency Range, MHz | 791–821 | 925–960 |
| Bandwidth, MHz | 30.00 | 35.00 |
| Insertion Loss, typical, dB | 0.60 | 0.60 |
| Group Delay Variation, maximum, ns | 30 | 30 |
| Group Delay Variation Bandwidth, MHz | 5.00 | 5.00 |
| Return Loss, minimum, dB | 18 | 18 |
| Input Power, RMS, maximum, W | 200 | 200 |
| Input Power, PEP, maximum, W | 2,000 | 2,000 |
| 3rd Order PIM, maximum, dBc | -153 | -153 |
| 3rd Order PIM Test Method | Two +43 dBm carriers | Two +43 dBm carriers |
Environmental Specifications
| Operating Temperature | -40 °C to +65 °C (-40 °F to +149 °F) |
| Relative Humidity | Up to 100% |
| Corrosion Test Method | IEC 60068-2-11, 30 days |
| Ingress Protection Test Method | IEC 60529:2001, IP67 |
Packaging and Weights
| Included | Mounting hardware |
| Volume | 11.2 L |
| Weight, net | 11.8 kg | 26.015 lb |
| Click on image to enlarge. |
| Click on image to enlarge. |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
Documentation & Downloads
Installation Instruction
Product Specification
Video
Filter Products – Designed for PIM Excellence
Filter Products – Designed for PIM Excellence
Warranty
Installation Instruction
Product Compliance Documentation
Product Specification
Video
Filter Products – Designed for PIM Excellence
Filter Products – Designed for PIM Excellence
Warranty
Other Ways to Browse
