Warning Icon
This product will be discontinued on: December 31, 2024

For other alternatives, please contact us for more information.

1 Replacement products available
  • E12F03P88
    Twin Diplexer, 1800/2100-2600, dc block all ports, with 4.3-10 connectors

E14F06P47

Twin Diplexer, 1350–1880 MHz/1920–2690 MHz, DC Block, with 4.3-10 connectors

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Industry leading PIM performance
  • New 4.3-10 connectors for improved PIM performance and size reduction
  • dc/AISG blocking on all ports
  • Designed for network modernization application, introduction of LTE1400 on existing site

Product Classification

Product Type Diplexer

General Specifications

Color Gray
Modularity 2-Twin
Mounting Pole | Wall
Mounting Pipe Hardware Band clamps (2)
RF Connector Interface 4.3-10 Female

Dimensions

Height 88 mm | 3.465 in
Width 138 mm | 5.433 in
Depth 141.5 mm | 5.571 in
Ground Screw Diameter 5 mm | 0.197 in
Mounting Pipe Diameter Range 42.6–122 mm

Outline Drawing

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm

Electrical Specifications, dc Power/Alarm

dc/AISG Pass-through Method No dc/AISG pass-through
Lightning Surge Current 5 kA
Lightning Surge Current Waveform 8/20 waveform

Electrical Specifications

Sub-module 1 | 2 1 | 2
Branch 1 2
Port Designation PORT 1 1350-1880 PORT 2 1920-2690

Electrical Specifications, Band Pass

Frequency Range, MHz 1350–1880 1920–2690
Insertion Loss, typical, dB 0.25 0.20
Return Loss, typical, dB 22 22
Isolation, typical, dB 40 40
Input Power, RMS, maximum, W 100 100
Input Power, PEP, maximum, W 1,000 1,000
3rd Order PIM, typical, dBc -157 -157
3rd Order PIM Test Method Two +43 dBm carriers Two +43 dBm carriers

Block Diagram

Click on image to enlarge.

Environmental Specifications

Operating Temperature -40 °C to +65 °C (-40 °F to +149 °F)
Corrosion Test Method IEC 60068-2-11, 30 days
Environmental Test Method ETSI EN 300 019-1-4
Ingress Protection Test Method IEC 60529:2001, IP67

Packaging and Weights

Included Mounting hardware
Volume 1.7 L
Weight, net 3 kg | 6.614 lb
Weight, without mounting hardware 2.5 kg | 5.512 lb

Product Classification

Product Type Diplexer

General Specifications

Color Gray
Modularity 2-Twin
Mounting Pole | Wall
Mounting Pipe Hardware Band clamps (2)
RF Connector Interface 4.3-10 Female

Dimensions

Height 88 mm | 3.465 in
Width 138 mm | 5.433 in
Depth 141.5 mm | 5.571 in
Ground Screw Diameter 5 mm | 0.197 in
Mounting Pipe Diameter Range 42.6–122 mm

Electrical Specifications

Impedance 50 ohm

Electrical Specifications, dc Power/Alarm

dc/AISG Pass-through Method No dc/AISG pass-through
Lightning Surge Current 5 kA
Lightning Surge Current Waveform 8/20 waveform

Electrical Specifications

Sub-module 1 | 2 1 | 2
Branch 1 2
Port Designation PORT 1 1350-1880 PORT 2 1920-2690

Electrical Specifications, Band Pass

Frequency Range, MHz 1350–1880 1920–2690
Insertion Loss, typical, dB 0.25 0.20
Return Loss, typical, dB 22 22
Isolation, typical, dB 40 40
Input Power, RMS, maximum, W 100 100
Input Power, PEP, maximum, W 1,000 1,000
3rd Order PIM, typical, dBc -157 -157
3rd Order PIM Test Method Two +43 dBm carriers Two +43 dBm carriers

Environmental Specifications

Operating Temperature -40 °C to +65 °C (-40 °F to +149 °F)
Corrosion Test Method IEC 60068-2-11, 30 days
Environmental Test Method ETSI EN 300 019-1-4
Ingress Protection Test Method IEC 60529:2001, IP67

Packaging and Weights

Included Mounting hardware
Volume 1.7 L
Weight, net 3 kg | 6.614 lb
Weight, without mounting hardware 2.5 kg | 5.512 lb
Click on image to enlarge.
Click on image to enlarge.

Product Specification

Video

Filter Products – Designed for PIM Excellence
Filter Products – Designed for PIM Excellence

Product Specification

Video

Filter Products – Designed for PIM Excellence
Filter Products – Designed for PIM Excellence