Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

NNH4SS-45A-R3BT8

16-port sector antenna, 4x 698–896, 8x 1695–2360 and 4x 3550- 3700 MHz, 45° HPBW, 3x RETs and 3x SBTs.

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Features broadband Low Band (698-896 MHz), Mid Band(1695-2360 MHz) and High Band (3550-3700 MHz) arrays for 4T4R (4X MIMO) capability for bands 5, 13, 25, 66 and 48. Also covers bands 12, 14, 29, and 30
  • Perfect antenna to add 3.5GHz CBRS to macro sites
  • Array configuration provides capability for 4T4R (4X MIMO) on Low Band, dual 4T4R (4X MIMO) on Mid Band and 4T4R (4X MIMO) on High Band
  • Excellent wind loading characteristics
  • Non-stacked mid band array design provides higher gain and narrower vertical beamwidth than traditional antenna designs

General Specifications

Antenna Type Sector
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Location Bottom
RF Connector Quantity, high band 4
RF Connector Quantity, mid band 8
RF Connector Quantity, low band 4
RF Connector Quantity, total 16

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 3 female | 3 male
Input Voltage 10–30 Vdc
Internal Bias Tee Port 1 | Port 5 | Port 7
Internal RET Low band (1) | Mid band (2)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0

Dimensions

Width 457 mm | 17.992 in
Depth 178 mm | 7.008 in
Length 1399 mm | 55.079 in
Net Weight, antenna only 29.5 kg | 65.036 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 698 – 896 MHz | 1695 – 2360 MHz | 3550 – 3700 MHz
Polarization ±45°
Total Input Power, maximum 1,600 W @ 50 °C

Electrical Specifications

R1,R2 R1,R2 Y1-Y4 Y1-Y4 Y1-Y4 Y1-Y4 P1,P2
Frequency Band, MHz 698–806 806–896 1695–1880 1850–1990 1920–2180 2300–2360 3550–3700
RF Port 1-4 1-4 5-12 5-12 5-12 5-12 13-16
Gain, dBi 12.7 13.3 15.3 15.7 16.3 16.5 15.0
Beamwidth, Horizontal, degrees 48 44 44 41 39 37 45
Beamwidth, Vertical, degrees 36 30.4 14.5 13.6 12.8 11.1 15.6
Beam Tilt, degrees 2–18 2–18 0–10 0–10 0–10 0–10 8
USLS (First Lobe), dB 19 17 16 17 16 15 16
Front-to-Back Ratio at 180°, dB 33 30 31 32 31 30 31
Isolation, Cross Polarization, dB 25 25 25 25 25 25 25
Isolation, Inter-band, dB 25 25 25 25 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153 -153 -145
Input Power per Port at 50°C, maximum, watts 300 300 250 250 250 200 100

Mechanical Specifications

Effective Projective Area (EPA), frontal 0.74 m² | 7.965 ft²
Effective Projective Area (EPA), lateral 0.15 m² | 1.615 ft²
Wind Loading @ Velocity, frontal 788.0 N @ 150 km/h (177.1 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 159.0 N @ 150 km/h (35.7 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 788.0 N @ 150 km/h (177.1 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 692.0 N @ 150 km/h (155.6 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 526 mm | 20.709 in
Depth, packed 283 mm | 11.142 in
Length, packed 1566 mm | 61.654 in
Weight, gross 41.9 kg | 92.374 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant

General Specifications

Antenna Type Sector
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Location Bottom
RF Connector Quantity, high band 4
RF Connector Quantity, mid band 8
RF Connector Quantity, low band 4
RF Connector Quantity, total 16

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 3 female | 3 male
Input Voltage 10–30 Vdc
Internal Bias Tee Port 1 | Port 5 | Port 7
Internal RET Low band (1) | Mid band (2)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0

Dimensions

Width 457 mm | 17.992 in
Depth 178 mm | 7.008 in
Length 1399 mm | 55.079 in
Net Weight, antenna only 29.5 kg | 65.036 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 698 – 896 MHz | 1695 – 2360 MHz | 3550 – 3700 MHz
Polarization ±45°
Total Input Power, maximum 1,600 W @ 50 °C

Electrical Specifications

R1,R2 R1,R2 Y1-Y4 Y1-Y4 Y1-Y4 Y1-Y4 P1,P2
Frequency Band, MHz 698–806 806–896 1695–1880 1850–1990 1920–2180 2300–2360 3550–3700
RF Port 1-4 1-4 5-12 5-12 5-12 5-12 13-16
Gain, dBi 12.7 13.3 15.3 15.7 16.3 16.5 15.0
Beamwidth, Horizontal, degrees 48 44 44 41 39 37 45
Beamwidth, Vertical, degrees 36 30.4 14.5 13.6 12.8 11.1 15.6
Beam Tilt, degrees 2–18 2–18 0–10 0–10 0–10 0–10 8
USLS (First Lobe), dB 19 17 16 17 16 15 16
Front-to-Back Ratio at 180°, dB 33 30 31 32 31 30 31
Isolation, Cross Polarization, dB 25 25 25 25 25 25 25
Isolation, Inter-band, dB 25 25 25 25 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153 -153 -145
Input Power per Port at 50°C, maximum, watts 300 300 250 250 250 200 100

Mechanical Specifications

Effective Projective Area (EPA), frontal 0.74 m² | 7.965 ft²
Effective Projective Area (EPA), lateral 0.15 m² | 1.615 ft²
Wind Loading @ Velocity, frontal 788.0 N @ 150 km/h (177.1 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 159.0 N @ 150 km/h (35.7 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 788.0 N @ 150 km/h (177.1 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 692.0 N @ 150 km/h (155.6 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 526 mm | 20.709 in
Depth, packed 283 mm | 11.142 in
Length, packed 1566 mm | 61.654 in
Weight, gross 41.9 kg | 92.374 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification