For other alternatives, please contact us for more information.

0 Alternative products available

KZZVV-65D-R5

10-port sector antenna, 2x 617–960, 4x 1427–2690 MHz and 4x 1695–2690 MHz, 65° HPBW, 5x RET with tilt indicators

Find a Partner

Specifications

Finish making your selections or clear them to view relevant specifications.

Features and Benefits

All Internal RET actuators are connected in “Cascaded SRET” configuration
Uses the 4.3-10 connector which is 40 percent smaller than the 7-16 DIN connector
Wind Loading; Frontal / Lateral / Rear – 477 / 409 / 506 N @ 150km/h
Supports re-configurable antenna sharing capability enabling control of the internal RET system using up to two separate RET compatible OEM radios

Specifications

General Specifications

Antenna Type	Sector
Band	Multiband
Color	Light Gray (RAL 7035)
Grounding Type	RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note	Outdoor usage
Radome Material	Fiberglass, UV resistant
Radiator Material	Aluminum \| Low loss circuit board
Reflector Material	Aluminum
RF Connector Interface	4.3-10 Female
RF Connector Location	Bottom
RF Connector Quantity, high band	8
RF Connector Quantity, low band	2
RF Connector Quantity, total	10

Remote Electrical Tilt (RET) Information

RET Hardware	CommRET v2
RET Interface, quantity	2 female \| 2 male
Input Voltage	10–30 Vdc
Power Consumption, active state, maximum	8 W
Power Consumption, idle state, maximum	1 W
Protocol	3GPP/AISG 2.0 (Single RET)

Dimensions

Width	350 mm \| 13.780 in
Depth	208 mm \| 8.189 in
Length	2688 mm \| 105.827 in
Net Weight, antenna only	33.6 kg \| 74.075 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance	50 ohm
Operating Frequency Band	617 – 960 MHz \| 1427 – 1518 MHz \| 1695 – 2690 MHz
Polarization	±45°

Electrical Specifications

Frequency Band, MHz	617–690	690–790	790–890	890–960	1427–1518	1695–1920	1930–2200	2300–2500	2500–2690	1695–1920	1930–2200	2300–2500	2500–2690
Gain, dBi	16.0	16.0	16.5	16.5	15.0	16.8	17.2	17.4	17.3	16.5	17.2	17.5	17.5
Beamwidth, Horizontal, degrees	73	73	70	71	71	58	56	66	62	61	60	62	60
Beamwidth, Vertical, degrees	9.3	8.4	7.5	6.9	9.4	7.7	6.8	5.8	5.4	7.5	6.6	5.8	5.4
Beam Tilt, degrees	2–12	2–12	2–12	2–12	2–12	2–12	2–12	2–12	2–12	2–12	2–12	2–12	2–12
USLS (First Lobe), dB	19	20	18	18	15	15	15	17	17	16	16	19	18
Front-to-Back Ratio at 180°, dB	26	29	32	34	32	38	35	31	29	38	37	32	32
Isolation, Cross Polarization, dB	25	25	25	25	25	25	25	25	25	28	28	28	28
Isolation, Inter-band, dB	28	28	28	28	28	28	28	28	28	28	28	28	28
VSWR \| Return loss, dB	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0
PIM, 3rd Order, 2 x 20 W, dBc	-150	-150	-150	-150	-150	-150	-150	-150	-150	-150	-150	-150	-150
Input Power per Port at 50°C, maximum, watts	300	300	300	300	250	250	250	200	200	250	250	200	200

Electrical Specifications, BASTA

Frequency Band, MHz	617–690	690–790	790–890	890–960	1427–1518	1695–1920	1930–2200	2300–2500	2500–2690	1695–1920	1930–2200	2300–2500	2500–2690
Gain by all Beam Tilts, average, dBi	15.9	15.9	16.4	16.3	14.9	16.6	17.0	17.1	17.0	16.4	17.0	17.2	17.2
Beamwidth, Horizontal Tolerance, degrees	±1.6	±2	±1.5	±2.9	±6.5	±4.7	±7.8	±5.5	±5.6	±5.5	±7.5	±5.3	±3.2
Beamwidth, Vertical Tolerance, degrees	±0.6	±0.5	±0.5	±0.5	±0.6	±0.7	±0.5	±0.3	±0.3	±0.5	±0.4	±0.3	±0.3
USLS, beampeak to 20° above beampeak, dB	17	15	15	13	14	15	15	16	15	14	15	14	14
Front-to-Back Total Power at 180° ± 30°, dB	22	24	23	22	24	29	27	24	23	27	28	25	25
CPR at Boresight, dB	20	21	22	19	13	21	20	20	22	23	23	20	20
CPR at Sector, dB	11	11	9	6	6	6	3	5	5	7	6	7	4

Mechanical Specifications

Wind Loading @ Velocity, frontal	477.0 N @ 150 km/h (107.2 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral	409.0 N @ 150 km/h (91.9 lbf @ 150 km/h)
Wind Loading @ Velocity, rear	506.0 N @ 150 km/h (113.8 lbf @ 150 km/h)
Wind Speed, maximum	241 km/h (150 mph)

Packaging and Weights

Width, packed	460 mm \| 18.110 in
Depth, packed	350 mm \| 13.780 in
Length, packed	2830 mm \| 111.417 in
Weight, gross	47.5 kg \| 104.719 lb

Regulatory Compliance/Certifications

Agency	Classification
ROHS	Compliant
CHINA-ROHS	Below maximum concentration value
REACH-SVHC	Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS	Compliant

General Specifications

Antenna Type	Sector
Band	Multiband
Color	Light Gray (RAL 7035)
Grounding Type	RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note	Outdoor usage
Radome Material	Fiberglass, UV resistant
Radiator Material	Aluminum \| Low loss circuit board
Reflector Material	Aluminum
RF Connector Interface	4.3-10 Female
RF Connector Location	Bottom
RF Connector Quantity, high band	8
RF Connector Quantity, low band	2
RF Connector Quantity, total	10

Remote Electrical Tilt (RET) Information

RET Hardware	CommRET v2
RET Interface, quantity	2 female \| 2 male
Input Voltage	10–30 Vdc
Power Consumption, active state, maximum	8 W
Power Consumption, idle state, maximum	1 W
Protocol	3GPP/AISG 2.0 (Single RET)

Dimensions

Width	350 mm \| 13.780 in
Depth	208 mm \| 8.189 in
Length	2688 mm \| 105.827 in
Net Weight, antenna only	33.6 kg \| 74.075 lb

Electrical Specifications

Impedance	50 ohm
Operating Frequency Band	617 – 960 MHz \| 1427 – 1518 MHz \| 1695 – 2690 MHz
Polarization	±45°

Electrical Specifications

Frequency Band, MHz	617–690	690–790	790–890	890–960	1427–1518	1695–1920	1930–2200	2300–2500	2500–2690	1695–1920	1930–2200	2300–2500	2500–2690
Gain, dBi	16.0	16.0	16.5	16.5	15.0	16.8	17.2	17.4	17.3	16.5	17.2	17.5	17.5
Beamwidth, Horizontal, degrees	73	73	70	71	71	58	56	66	62	61	60	62	60
Beamwidth, Vertical, degrees	9.3	8.4	7.5	6.9	9.4	7.7	6.8	5.8	5.4	7.5	6.6	5.8	5.4
Beam Tilt, degrees	2–12	2–12	2–12	2–12	2–12	2–12	2–12	2–12	2–12	2–12	2–12	2–12	2–12
USLS (First Lobe), dB	19	20	18	18	15	15	15	17	17	16	16	19	18
Front-to-Back Ratio at 180°, dB	26	29	32	34	32	38	35	31	29	38	37	32	32
Isolation, Cross Polarization, dB	25	25	25	25	25	25	25	25	25	28	28	28	28
Isolation, Inter-band, dB	28	28	28	28	28	28	28	28	28	28	28	28	28
VSWR \| Return loss, dB	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0
PIM, 3rd Order, 2 x 20 W, dBc	-150	-150	-150	-150	-150	-150	-150	-150	-150	-150	-150	-150	-150
Input Power per Port at 50°C, maximum, watts	300	300	300	300	250	250	250	200	200	250	250	200	200

Electrical Specifications, BASTA

Frequency Band, MHz	617–690	690–790	790–890	890–960	1427–1518	1695–1920	1930–2200	2300–2500	2500–2690	1695–1920	1930–2200	2300–2500	2500–2690
Gain by all Beam Tilts, average, dBi	15.9	15.9	16.4	16.3	14.9	16.6	17.0	17.1	17.0	16.4	17.0	17.2	17.2
Beamwidth, Horizontal Tolerance, degrees	±1.6	±2	±1.5	±2.9	±6.5	±4.7	±7.8	±5.5	±5.6	±5.5	±7.5	±5.3	±3.2
Beamwidth, Vertical Tolerance, degrees	±0.6	±0.5	±0.5	±0.5	±0.6	±0.7	±0.5	±0.3	±0.3	±0.5	±0.4	±0.3	±0.3
USLS, beampeak to 20° above beampeak, dB	17	15	15	13	14	15	15	16	15	14	15	14	14
Front-to-Back Total Power at 180° ± 30°, dB	22	24	23	22	24	29	27	24	23	27	28	25	25
CPR at Boresight, dB	20	21	22	19	13	21	20	20	22	23	23	20	20
CPR at Sector, dB	11	11	9	6	6	6	3	5	5	7	6	7	4

Mechanical Specifications

Wind Loading @ Velocity, frontal	477.0 N @ 150 km/h (107.2 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral	409.0 N @ 150 km/h (91.9 lbf @ 150 km/h)
Wind Loading @ Velocity, rear	506.0 N @ 150 km/h (113.8 lbf @ 150 km/h)
Wind Speed, maximum	241 km/h (150 mph)

Packaging and Weights

Width, packed	460 mm \| 18.110 in
Depth, packed	350 mm \| 13.780 in
Length, packed	2830 mm \| 111.417 in
Weight, gross	47.5 kg \| 104.719 lb

Click on image to enlarge.

Regulatory Compliance/Certifications

Agency	Classification
ROHS	Compliant
CHINA-ROHS	Below maximum concentration value
REACH-SVHC	Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS	Compliant