Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

FFVV-65C-R2N23

8-port sector antenna, 4x 617-894 and 4x 1695–2690 MHz, 65° HPBW, 2x RET

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Meets -153dBc 3rd order PIM for 617-894MHz &1695-2690MHz, using 2x40W carriers
  • Equivalent performance designed into a narrower antenna platform
  • Improved aerodynamic design allows for reduced wind load
  • Reduced weight platform allows for decreased tower loading

General Specifications

Antenna Type Sector
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Aluminum | Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, mid band 4
RF Connector Quantity, low band 4
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Low band (1) | Mid band (1)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0

Dimensions

Width 579 mm | 22.795 in
Depth 212 mm | 8.346 in
Length 2438 mm | 95.984 in
Net Weight, antenna only 47 kg | 103.617 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 617 – 894 MHz | 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 900 W @ 50 °C

Electrical Specifications

R1,R2 R1,R2 Y1,Y2 Y1,Y2 Y1,Y2 Y1,Y2 Y1,Y2
Frequency Band, MHz 617–698 698–894 1695–1880 1850–1990 1920–2200 2300–2500 2500–2690
RF Port 1-4 1-4 5-8 5-8 5-8 5-8 5-8
Gain, dBi 15.7 16.5 18.0 18.2 18.6 19.1 19.6
Beamwidth, Horizontal, degrees 70 62 65 63 63 63 52
Beamwidth, Vertical, degrees 10.4 8.9 5.5 5.3 5.1 4.4 4.1
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 17 17 18 17 17 19 18
Front-to-Back Ratio at 180°, dB 32 31 36 39 37 32 32
Front-to-Back Total Power at 180° ± 30°, dB 21 22 30 31 30 27 27
Isolation, Cross Polarization, dB 25 25 25 25 25 25 25
Isolation, Inter-band, dB 25 25 25 25 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 40 W, dBc -153 -153 -153 -153 -153 -153 -153
Input Power per Port at 50°C, maximum, watts 250 250 200 200 200 200 200

Mechanical Specifications

Wind Loading @ Velocity, frontal 683.0 N @ 150 km/h (153.5 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 280.0 N @ 150 km/h (62.9 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,090.0 N @ 150 km/h (245.0 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 692.0 N @ 150 km/h (155.6 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 682 mm | 26.850 in
Depth, packed 319 mm | 12.559 in
Length, packed 2562 mm | 100.866 in
Weight, gross 68.5 kg | 151.016 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant

General Specifications

Antenna Type Sector
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Aluminum | Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, mid band 4
RF Connector Quantity, low band 4
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Low band (1) | Mid band (1)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0

Dimensions

Width 579 mm | 22.795 in
Depth 212 mm | 8.346 in
Length 2438 mm | 95.984 in
Net Weight, antenna only 47 kg | 103.617 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 617 – 894 MHz | 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 900 W @ 50 °C

Electrical Specifications

R1,R2 R1,R2 Y1,Y2 Y1,Y2 Y1,Y2 Y1,Y2 Y1,Y2
Frequency Band, MHz 617–698 698–894 1695–1880 1850–1990 1920–2200 2300–2500 2500–2690
RF Port 1-4 1-4 5-8 5-8 5-8 5-8 5-8
Gain, dBi 15.7 16.5 18.0 18.2 18.6 19.1 19.6
Beamwidth, Horizontal, degrees 70 62 65 63 63 63 52
Beamwidth, Vertical, degrees 10.4 8.9 5.5 5.3 5.1 4.4 4.1
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 17 17 18 17 17 19 18
Front-to-Back Ratio at 180°, dB 32 31 36 39 37 32 32
Front-to-Back Total Power at 180° ± 30°, dB 21 22 30 31 30 27 27
Isolation, Cross Polarization, dB 25 25 25 25 25 25 25
Isolation, Inter-band, dB 25 25 25 25 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 40 W, dBc -153 -153 -153 -153 -153 -153 -153
Input Power per Port at 50°C, maximum, watts 250 250 200 200 200 200 200

Mechanical Specifications

Wind Loading @ Velocity, frontal 683.0 N @ 150 km/h (153.5 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 280.0 N @ 150 km/h (62.9 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,090.0 N @ 150 km/h (245.0 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 692.0 N @ 150 km/h (155.6 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 682 mm | 26.850 in
Depth, packed 319 mm | 12.559 in
Length, packed 2562 mm | 100.866 in
Weight, gross 68.5 kg | 151.016 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification