1. Startseite
  2. Produktart
  3. Antennen
  4. Antennen und Anlagen für die Basisstation
  5. Antennen für die Basisstation
  6. LLPX310R-V1
Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

LLPX310R-V1

4-port sector antenna, 4x 2300–2700 MHz, 65° HPBW, 2x RET with manual override

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Integrated Internal Remote Electrical Tilt (RET), with independent control of electrical tilt with manual override on all arrays

General Specifications

Antenna Type Sector
Band Single band
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Polyester fiberglass pultrusion
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, high band 4
RF Connector Quantity, mid band 0
RF Connector Quantity, low band 0
RF Connector Quantity, total 4

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Male
RET Interface, quantity 1 male
Input Voltage 10–30 Vdc
Internal RET High band (2)
Power Consumption, idle state, maximum 2 W
Power Consumption, normal conditions, maximum 13 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 300 mm | 11.811 in
Depth 115 mm | 4.528 in
Length 1077 mm | 42.402 in
Net Weight, without mounting kit 13 kg | 28.660 lb

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 2300 – 2700 MHz
Polarization ±45°

Electrical Specifications

Frequency Band, MHz 2300–2500 2500–2700
Gain, dBi 17.2 17.8
Beamwidth, Horizontal, degrees 65 63
Beamwidth, Vertical, degrees 7 6.5
Beam Tilt, degrees 0–10 0–10
USLS (First Lobe), dB 18 18
Front-to-Back Ratio at 180°, dB 30 30
Isolation, Cross Polarization, dB 30 30
VSWR | Return loss, dB 1.43 | 15.0 1.43 | 15.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150
Input Power per Port, maximum, watts 250 250

Mechanical Specifications

Wind Loading @ Velocity, maximum 450.0 N @ 160 km/h (101.2 lbf @ 160 km/h)
Wind Speed, maximum 200 km/h (124 mph)

Packaging and Weights

Width, packed 366 mm | 14.409 in
Depth, packed 213 mm | 8.386 in
Length, packed 1260 mm | 49.606 in
Weight, gross 21.5 kg | 47.399 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
UK-ROHS Compliant

General Specifications

Antenna Type Sector
Band Single band
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Polyester fiberglass pultrusion
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, high band 4
RF Connector Quantity, mid band 0
RF Connector Quantity, low band 0
RF Connector Quantity, total 4

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Male
RET Interface, quantity 1 male
Input Voltage 10–30 Vdc
Internal RET High band (2)
Power Consumption, idle state, maximum 2 W
Power Consumption, normal conditions, maximum 13 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 300 mm | 11.811 in
Depth 115 mm | 4.528 in
Length 1077 mm | 42.402 in
Net Weight, without mounting kit 13 kg | 28.660 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 2300 – 2700 MHz
Polarization ±45°

Electrical Specifications

Frequency Band, MHz 2300–2500 2500–2700
Gain, dBi 17.2 17.8
Beamwidth, Horizontal, degrees 65 63
Beamwidth, Vertical, degrees 7 6.5
Beam Tilt, degrees 0–10 0–10
USLS (First Lobe), dB 18 18
Front-to-Back Ratio at 180°, dB 30 30
Isolation, Cross Polarization, dB 30 30
VSWR | Return loss, dB 1.43 | 15.0 1.43 | 15.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150
Input Power per Port, maximum, watts 250 250

Mechanical Specifications

Wind Loading @ Velocity, maximum 450.0 N @ 160 km/h (101.2 lbf @ 160 km/h)
Wind Speed, maximum 200 km/h (124 mph)

Packaging and Weights

Width, packed 366 mm | 14.409 in
Depth, packed 213 mm | 8.386 in
Length, packed 1260 mm | 49.606 in
Weight, gross 21.5 kg | 47.399 lb
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
UK-ROHS Compliant