Warning Icon

For other alternatives, please contact us for more information.

0 Replacement products available

E14R00P35

Dual Band Tower Mounted Amplifier, 1800/2100 MHz with 1400 MHz bypass, 12 dB, 2 BTS & 2 ANT ports, AISG with 1 RET connector (1 devices with 2 sub-units each), with 4.3-10 connectors
Specifications
Finish making your selections or clear them to view relevant specifications.
How to Buy
Features and Benefits
  • Industry leading PIM performance
  • New 4.3-10 connectors for improved PIM performance and size reduction
  • Designed for network modernization application, introduction of LTE1400 on existing site
  • TMA with 1452-1492 MHz bypass
  • 2 input ports and 2 output ports
  • Automatic LNA by-pass function
  • Built in lightning protection
  • Connectors “in line”
  • Single AISG with 1 RET connector
  • 1 device with 2 sub-units
Specifications

Product Classification

Product Type 1-BTS:1-ANT (Uniplex) | Tower mounted amplifier

General Specifications

Color Gray
Modularity 2-Twin
Mounting Pole | Wall
Mounting Pipe Hardware Band clamps (2)
RF Connector Interface 4.3-10 Female

Dimensions

Height 280 mm | 11.024 in
Width 175 mm | 6.89 in
Depth 98 mm | 3.858 in
Mounting Pipe Diameter Range 50–120 mm

Outline Drawing

Click on image to enlarge.

Electrical Specifications

License Band, Band Pass SDL 1400
License Band, LNA DCS 1800 | IMT 2100 | IMT 2600

Electrical Specifications, dc Power/Alarm

dc Switching/Redundancy Yes
Lightning Surge Current 10 kA
Lightning Surge Current Waveform 8/20 waveform
Voltage 7–30 Vdc
Alarm Current, CWA Mode 190 mA ±15 mA

Electrical Specifications, AISG

AISG Connector 8-pin DIN Female
AISG Connector Standard IEC 60130-9
Protocol AISG 2.0
Voltage, AISG Mode 10–30 Vdc

Electrical Specifications

Sub-module 1 | 2 1 | 2 1 | 2
Branch 1 1 1
Port Designation ANT ANT ANT
License Band SDL 1400, Band Pass DCS 1800, LNA IMT 2100, LNA

Electrical Specifications, Band Pass

Frequency Range, MHz 1452–1492
Insertion Loss, typical, dB 0.35
Return Loss, minimum, dB 18
Input Power, RMS, maximum, W 200
Input Power, PEP, maximum, W 100
3rd Order PIM, typical, dBc -162
3rd Order PIM Test Method Two +43 dBm carriers

Electrical Specifications, Rx Uplink

Frequency Range, MHz 1710–1785 1920–1980
Bandwidth, MHz 75.00 60.00
Gain, nominal, dB 12.0 12.0
Noise Figure, typical, dB 1.7 1.6
Output IP3, minimum, dBm 12 12
Return Loss, minimum, dB 18 18
Insertion Loss - Bypass Mode, typical, dB 2.5 2.3
Return Loss - Bypass Mode, typical, dB 16 16

Electrical Specifications, Tx Downlink

Frequency Range, MHz 1805–1880 2110–2170
Bandwidth, MHz 60.00 60.00
Insertion Loss, typical, dB 0.30 0.30
Return Loss, minimum, dB 18 18
Input Power, RMS, maximum, W 200 200
Input Power, PEP, maximum, W 1,000 1,000
3rd Order PIM, typical, dBc -162 -162
3rd Order PIM Test Method Two +43 dBm carriers Two +43 dBm carriers

Block Diagram

Click on image to enlarge.

Mechanical Specifications

Wind Speed, maximum 200 km/h | 124.274 mph

Environmental Specifications

Operating Temperature -40 °C to +65 °C (-40 °F to +149 °F)
Relative Humidity Up to 100%
Corrosion Test Method IEC 60068-2-11, 30 days
Ingress Protection Test Method IEC 60529:2001, IP67

Packaging and Weights

Included Mounting hardware
Volume 4.8 L
Weight, net 8 kg | 17.637 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

Product Classification

Product Type 1-BTS:1-ANT (Uniplex) | Tower mounted amplifier

General Specifications

Color Gray
Modularity 2-Twin
Mounting Pole | Wall
Mounting Pipe Hardware Band clamps (2)
RF Connector Interface 4.3-10 Female

Dimensions

Height 280 mm | 11.024 in
Width 175 mm | 6.89 in
Depth 98 mm | 3.858 in
Mounting Pipe Diameter Range 50–120 mm

Electrical Specifications

License Band, Band Pass SDL 1400
License Band, LNA DCS 1800 | IMT 2100 | IMT 2600

Electrical Specifications, dc Power/Alarm

dc Switching/Redundancy Yes
Lightning Surge Current 10 kA
Lightning Surge Current Waveform 8/20 waveform
Voltage 7–30 Vdc
Alarm Current, CWA Mode 190 mA ±15 mA

Electrical Specifications, AISG

AISG Connector 8-pin DIN Female
AISG Connector Standard IEC 60130-9
Protocol AISG 2.0
Voltage, AISG Mode 10–30 Vdc

Electrical Specifications

Sub-module 1 | 2 1 | 2 1 | 2
Branch 1 1 1
Port Designation ANT ANT ANT
License Band SDL 1400, Band Pass DCS 1800, LNA IMT 2100, LNA

Electrical Specifications, Band Pass

Frequency Range, MHz 1452–1492
Insertion Loss, typical, dB 0.35
Return Loss, minimum, dB 18
Input Power, RMS, maximum, W 200
Input Power, PEP, maximum, W 100
3rd Order PIM, typical, dBc -162
3rd Order PIM Test Method Two +43 dBm carriers

Electrical Specifications, Rx Uplink

Frequency Range, MHz 1710–1785 1920–1980
Bandwidth, MHz 75.00 60.00
Gain, nominal, dB 12.0 12.0
Noise Figure, typical, dB 1.7 1.6
Output IP3, minimum, dBm 12 12
Return Loss, minimum, dB 18 18
Insertion Loss - Bypass Mode, typical, dB 2.5 2.3
Return Loss - Bypass Mode, typical, dB 16 16

Electrical Specifications, Tx Downlink

Frequency Range, MHz 1805–1880 2110–2170
Bandwidth, MHz 60.00 60.00
Insertion Loss, typical, dB 0.30 0.30
Return Loss, minimum, dB 18 18
Input Power, RMS, maximum, W 200 200
Input Power, PEP, maximum, W 1,000 1,000
3rd Order PIM, typical, dBc -162 -162
3rd Order PIM Test Method Two +43 dBm carriers Two +43 dBm carriers

Mechanical Specifications

Wind Speed, maximum 200 km/h | 124.274 mph

Environmental Specifications

Operating Temperature -40 °C to +65 °C (-40 °F to +149 °F)
Relative Humidity Up to 100%
Corrosion Test Method IEC 60068-2-11, 30 days
Ingress Protection Test Method IEC 60529:2001, IP67

Packaging and Weights

Included Mounting hardware
Volume 4.8 L
Weight, net 8 kg | 17.637 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
Other Ways to Browse