Warning Icon

For other alternatives, please contact us for more information.

0 Replacement products available

VVSSP-65S-R1B

10-port small cell antenna, 4x 1695–2690, 4x 3400-3800 and 2x 5150-5925 MHz. 65° HPBW, Internal RET and SBT
Specifications
Finish making your selections or clear them to view relevant specifications.
How to Buy
Specifications

Electrical Specifications

Frequency Band, MHz 1695–1920 1920–2180 2300–2690 3400–3800 5150–5925
Gain, dBi 11.6 12.3 12.8 9.8 4.2
Beamwidth, Horizontal, degrees 85 74 70 71 73
Beamwidth, Vertical, degrees 22.9 19.7 16 32.9 26.3
Beam Tilt, degrees 2–10 2–10 2–10 0–13 0–10
USLS (First Lobe), dB 14 16 15 11 13
Front-to-Back Ratio at 180°, dB 25 28 26 25 26
Isolation, Cross Polarization, dB 25 25 25 25 25
Isolation, Inter-band, dB 25 25 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -150
Input Power per Port at 50°C, maximum, watts 75 75 75 35 20

Electrical Specifications, BASTA

Frequency Band, MHz 1695–1920 1920–2180 2300–2690 3400–3800 5150–5925
Gain by all Beam Tilts, average, dBi 11.2 11.9 12.3 9.4 3.2
Gain by all Beam Tilts Tolerance, dB ±0.7 ±0.4 ±0.5 ±0.8 ±1.1
Gain by Beam Tilt, average, dBi 2 ° | 11.0
6 ° | 11.2
10 ° | 11.2
2 ° | 11.8
6 ° | 11.9
10 ° | 12.0
2 ° | 12.1
6 ° | 12.4
10 ° | 12.4
Beamwidth, Horizontal Tolerance, degrees ±8.4 ±8.2 ±8.5 ±12 ±21
Beamwidth, Vertical Tolerance, degrees ±2.4 ±2 ±1.3 ±2.6 ±4.8
Front-to-Back Total Power at 180° ± 30°, dB 18 22 20 18 22
CPR at Boresight, dB 14 17 16 15 10
CPR at Sector, dB 10 9 6 3 5

General Specifications

Antenna Type Small Cell
Polarization ±45°
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN | Outdoor usage
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 10
RF Connector Quantity, total 10

Remote Electrical Tilt (RET) Information, General

RET Interface 8-pin DIN Male
RET Interface, quantity 1 male

Dimensions

Length 600 mm | 23.622 in
Outer Diameter 200 mm | 7.874 in

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 3400 – 3800 MHz | 5150 – 5925 MHz | 1695 – 2690 MHz
Total Input Power, maximum 300 W @ 50 °C

Remote Electrical Tilt (RET) Information, Electrical

Protocol 3GPP/AISG 2.0 (Single RET)
Power Consumption, active state, maximum 1 W
Power Consumption, idle state, maximum 10 W
Input Voltage 10–30 Vdc
Internal Bias Tee Port 4
Internal RET High band (1)

Material Specifications

Radiator Material Low loss circuit board
Radome Material ASA, UV stabilized
Reflector Material Aluminum

Mechanical Specifications

Wind Loading at Velocity, frontal 90.0 N @ 150 km/h | 20.2 lbf @ 150 km/h
Wind Speed, maximum 241 km/h | 149.75 mph

Packaging and Weights

Width, packed 320 mm | 12.598 in
Depth, packed 300 mm | 11.811 in
Length, packed 850 mm | 33.465 in
Net Weight, without mounting kit 5.9 kg | 13.007 lb
Weight, gross 8.5 kg | 18.739 lb

5 GHz Port Power Table

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 ISO 9001:2015Designed, manufactured and/or distributed under this quality management system
ROHS ROHSCompliant
CHINA-ROHS CHINA-ROHSBelow maximum concentration value
REACH-SVHC REACH-SVHCCompliant as per SVHC revision on www.commscope.com/ProductCompliance

Electrical Specifications

Frequency Band, MHz 1695–1920 1920–2180 2300–2690 3400–3800 5150–5925
Gain, dBi 11.6 12.3 12.8 9.8 4.2
Beamwidth, Horizontal, degrees 85 74 70 71 73
Beamwidth, Vertical, degrees 22.9 19.7 16 32.9 26.3
Beam Tilt, degrees 2–10 2–10 2–10 0–13 0–10
USLS (First Lobe), dB 14 16 15 11 13
Front-to-Back Ratio at 180°, dB 25 28 26 25 26
Isolation, Cross Polarization, dB 25 25 25 25 25
Isolation, Inter-band, dB 25 25 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -150
Input Power per Port at 50°C, maximum, watts 75 75 75 35 20

Electrical Specifications, BASTA

Frequency Band, MHz 1695–1920 1920–2180 2300–2690 3400–3800 5150–5925
Gain by all Beam Tilts, average, dBi 11.2 11.9 12.3 9.4 3.2
Gain by all Beam Tilts Tolerance, dB ±0.7 ±0.4 ±0.5 ±0.8 ±1.1
Gain by Beam Tilt, average, dBi 2 ° | 11.0; 6 ° | 11.2;10 ° | 11.2 2 ° | 11.8; 6 ° | 11.9;10 ° | 12.0 2 ° | 12.1; 6 ° | 12.4;10 ° | 12.4
Beamwidth, Horizontal Tolerance, degrees ±8.4 ±8.2 ±8.5 ±12 ±21
Beamwidth, Vertical Tolerance, degrees ±2.4 ±2 ±1.3 ±2.6 ±4.8
Front-to-Back Total Power at 180° ± 30°, dB 18 22 20 18 22
CPR at Boresight, dB 14 17 16 15 10
CPR at Sector, dB 10 9 6 3 5

General Specifications

Antenna Type Small Cell
Polarization ±45°
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN | Outdoor usage
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 10
RF Connector Quantity, total 10

Remote Electrical Tilt (RET) Information, General

RET Interface 8-pin DIN Male
RET Interface, quantity 1 male

Dimensions

Length 600 mm | 23.622 in
Outer Diameter 200 mm | 7.874 in

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 3400 – 3800 MHz | 5150 – 5925 MHz | 1695 – 2690 MHz
Total Input Power, maximum 300 W @ 50 °C

Remote Electrical Tilt (RET) Information, Electrical

Protocol 3GPP/AISG 2.0 (Single RET)
Power Consumption, active state, maximum 1 W
Power Consumption, idle state, maximum 10 W
Input Voltage 10–30 Vdc
Internal Bias Tee Port 4
Internal RET High band (1)

Material Specifications

Radiator Material Low loss circuit board
Radome Material ASA, UV stabilized
Reflector Material Aluminum

Mechanical Specifications

Wind Loading at Velocity, frontal 90.0 N @ 150 km/h | 20.2 lbf @ 150 km/h
Wind Speed, maximum 241 km/h | 149.75 mph

Packaging and Weights

Width, packed 320 mm | 12.598 in
Depth, packed 300 mm | 11.811 in
Length, packed 850 mm | 33.465 in
Net Weight, without mounting kit 5.9 kg | 13.007 lb
Weight, gross 8.5 kg | 18.739 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 ISO 9001:2015Designed, manufactured and/or distributed under this quality management system
ROHS ROHSCompliant
CHINA-ROHS CHINA-ROHSBelow maximum concentration value
REACH-SVHC REACH-SVHCCompliant as per SVHC revision on www.commscope.com/ProductCompliance
Documentation & Downloads

Assembly Drawing

Environment Health and Safety

Product Information

Product Specification

Warranty

Other Ways to Browse