Warning Icon

For other alternatives, please contact us for more information.

0 Replacement products available

RVVT4-65D-R4

14-port sector antenna, 2x 694–960, 4x 1695-2690 and 8x 2300–2690 MHz, 65° HPBW, 4x RET
Specifications
Finish making your selections or clear them to view relevant specifications.
How to Buy
Features and Benefits
  • Combination of Tri-Band antenna and 2.4/2.6 GHz 8T8R beam forming antenna
  • Internal SBT RET support via Calibration Port of 2.4/2.6 GHz array
  • Optimized for Software Defined Split Six Sector applications on 2.4/2.6 GHz
  • Supports re-configurable antenna sharing capability enabling control of the internal RET system using up to two separate RET compatible OEM radios
Specifications

General Specifications

Antenna Type Sector
Band Multiband
Calibration Connector Interface 4.3-10 Female
Calibration Connector Quantity 1
Color Light gray
Effective Projective Area (EPA), frontal 0.45 m² | 4.844 ft²
Effective Projective Area (EPA), lateral 0.38 m² | 4.09 ft²
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 12
RF Connector Quantity, low band 2
RF Connector Quantity, total 14

Remote Electrical Tilt (RET) Information, General

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 female | 2 male

Dimensions

Width 350 mm | 13.78 in
Length 2688 mm | 105.827 in
Depth 208 mm | 8.189 in
Column Spacing 58 mm | 2.283 in

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1695 – 2690 MHz | 2300 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 900 W @ 50 °C

Remote Electrical Tilt (RET) Information, Electrical

Protocol 3GPP/AISG 2.0 (Single RET)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 8 W
Input Voltage 10–30 Vdc
Internal Bias Tee Cal Port
Internal RET High band (3) | Low band (1)

Electrical Specifications

R1 R1 R1 Y1-Y4 Y1-Y4 Y5-Y6 Y5-Y6 Y5-Y6
Frequency Band, MHz 694–790 790–890 890–960 2300–2500 2490–2690 1695–1920 1920–2200 2300–2690
Gain, dBi 16.6 17.0 17.3 16.4 16.3 16.8 17.3 17.6
Beamwidth, Horizontal, degrees 68 67 65 94 95 62 61 63
Beamwidth, Vertical, degrees 8.4 7.5 6.9 5.7 5.3 7.3 6.5 5.5
Beam Tilt, degrees 0–10 0–10 0–10 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 17 19 20 16 17 16 18 21
Front-to-Back Ratio at 180°, dB 30 32 35 31 30 34 38 33
Coupling level, Amp, Antenna port to Cal port, dB 26 26
Coupling level, max Amp Δ, Antenna port to Cal port, dB ±2 ±2
Coupler, max Amp Δ, Antenna port to Cal port, dB 0.9 0.9
Coupler, max Phase Δ, Antenna port to Cal port, degrees 7 7
Isolation, Cross Polarization, dB 28 28 28 28 28 28 28 28
Isolation, Inter-band, dB 30 30 30 20 20 30 30 30
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 250 250 250 150 150 200 200 150

Electrical Specifications, BASTA

Frequency Band, MHz 694–790 790–890 890–960 2300–2500 2490–2690 1695–1920 1920–2200 2300–2690
Gain by all Beam Tilts, average, dBi 16.4 16.9 17.1 15.6 15.5 16.4 17.0 17.1
Gain by all Beam Tilts Tolerance, dB ±0.3 ±0.3 ±0.3 ±1.1 ±1 ±0.7 ±0.3 ±0.6
Gain by Beam Tilt, average, dBi 0 ° | 16.2
5 ° | 16.5
10 ° | 16.4
0 ° | 16.6
5 ° | 17.0
10 ° | 16.9
0 ° | 16.9
5 ° | 17.2
10 ° | 17.1
2 ° | 15.3
7 ° | 15.8
12 ° | 15.4
2 ° | 15.2
7 ° | 15.7
12 ° | 15.3
2 ° | 16.2
7 ° | 16.4
12 ° | 16.2
2 ° | 16.7
7 ° | 17.1
12 ° | 16.8
2 ° | 16.9
7 ° | 17.3
12 ° | 16.9
Beamwidth, Horizontal Tolerance, degrees ±1.1 ±1.2 ±0.8 ±16.1 ±10.8 ±3.5 ±2.2 ±4.4
Beamwidth, Vertical Tolerance, degrees ±0.5 ±0.4 ±0.3 ±0.4 ±0.2 ±0.6 ±0.5 ±0.4
USLS, beampeak to 20° above beampeak, dB 16 18 18 14 14 16 17 14
Front-to-Back Total Power at 180° ± 30°, dB 26 26 26 24 24 27 27 26
CPR at Boresight, dB 19 21 21 16 16 21 21 19
CPR at Sector, dB 13 12 13 10 11 10 12 8

Electrical Specifications, Broadcast 65

Frequency Band, MHz 694–790 790–890 890–960 2300–2500 2490–2690 1695–1920 1920–2200 2300–2690
Gain, dBi 17.2 17.1
Beamwidth, Horizontal, degrees 62 62
Beamwidth, Horizontal Tolerance, degrees ±3.4 ±3.7
Beamwidth, Vertical, degrees 5.7 5.3
Beamwidth, Vertical Tolerance, degrees ±0.4 ±0.2
USLS (First Lobe), dB 17 17

Electrical Specifications, Service Beam

Frequency Band, MHz 694–790 790–890 890–960 2300–2500 2490–2690 1695–1920 1920–2200 2300–2690
Steered 0° Gain, dBi 21.3 21.2
Steered 0° Gain Tolerance, dBi ±0.4 ±0.5
Steered 0° Beamwidth, Horizontal, degrees 26 25
Steered 0° CPR over 10 dB Beamwidth, dB 18 19
Steered 0° Horizontal Sidelobe, dB 13 11
Steered 30° Gain, dBi 20.6 20.5
Steered 30° Gain Tolerance, dBi ±0.4 ±0.6
Steered 30° Beamwidth, Horizontal, degrees 27 26
Steered 30° CPR over 10 dB Beamwidth, dB 13 13

Electrical Specifications, Soft Split

Frequency Band, MHz 694–790 790–890 890–960 2300–2500 2490–2690 1695–1920 1920–2200 2300–2690
Gain, dBi 20.3 20.3
Beamwidth, Horizontal, degrees 31 30
Horizontal Sidelobe, dB 21 19

Mechanical Specifications

Wind Loading at Velocity, frontal 109.7 lbf @ 150 km/h | 477.0 N @ 150 km/h
Wind Loading at Velocity, lateral 409.0 N @ 150 km/h | 91.9 lbf @ 150 km/h
Wind Loading at Velocity, maximum 1,010.0 N @ 150 km/h | 227.1 lbf @ 150 km/h
Wind Speed, maximum 241 km/h | 149.75 mph

Packaging and Weights

Width, packed 460 mm | 18.11 in
Depth, packed 350 mm | 13.78 in
Length, packed 2830 mm | 111.417 in
Net Weight, without mounting kit 37.8 kg | 83.335 lb
Weight, gross 51.8 kg | 114.199 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

General Specifications

Antenna Type Sector
Band Multiband
Calibration Connector Interface 4.3-10 Female
Calibration Connector Quantity 1
Color Light gray
Effective Projective Area (EPA), frontal 0.45 m² | 4.844 ft²
Effective Projective Area (EPA), lateral 0.38 m² | 4.09 ft²
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 12
RF Connector Quantity, low band 2
RF Connector Quantity, total 14

Remote Electrical Tilt (RET) Information, General

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 female | 2 male

Dimensions

Width 350 mm | 13.78 in
Length 2688 mm | 105.827 in
Depth 208 mm | 8.189 in
Column Spacing 58 mm | 2.283 in

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1695 – 2690 MHz | 2300 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 900 W @ 50 °C

Remote Electrical Tilt (RET) Information, Electrical

Protocol 3GPP/AISG 2.0 (Single RET)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 8 W
Input Voltage 10–30 Vdc
Internal Bias Tee Cal Port
Internal RET High band (3) | Low band (1)

Electrical Specifications

R1 R1 R1 Y1-Y4 Y1-Y4 Y5-Y6 Y5-Y6 Y5-Y6
Frequency Band, MHz 694–790 790–890 890–960 2300–2500 2490–2690 1695–1920 1920–2200 2300–2690
Gain, dBi 16.6 17.0 17.3 16.4 16.3 16.8 17.3 17.6
Beamwidth, Horizontal, degrees 68 67 65 94 95 62 61 63
Beamwidth, Vertical, degrees 8.4 7.5 6.9 5.7 5.3 7.3 6.5 5.5
Beam Tilt, degrees 0–10 0–10 0–10 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 17 19 20 16 17 16 18 21
Front-to-Back Ratio at 180°, dB 30 32 35 31 30 34 38 33
Coupling level, Amp, Antenna port to Cal port, dB 26 26
Coupling level, max Amp Δ, Antenna port to Cal port, dB ±2 ±2
Coupler, max Amp Δ, Antenna port to Cal port, dB 0.9 0.9
Coupler, max Phase Δ, Antenna port to Cal port, degrees 7 7
Isolation, Cross Polarization, dB 28 28 28 28 28 28 28 28
Isolation, Inter-band, dB 30 30 30 20 20 30 30 30
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 250 250 250 150 150 200 200 150

Electrical Specifications, BASTA

Frequency Band, MHz 694–790 790–890 890–960 2300–2500 2490–2690 1695–1920 1920–2200 2300–2690
Gain by all Beam Tilts, average, dBi 16.4 16.9 17.1 15.6 15.5 16.4 17.0 17.1
Gain by all Beam Tilts Tolerance, dB ±0.3 ±0.3 ±0.3 ±1.1 ±1 ±0.7 ±0.3 ±0.6
Gain by Beam Tilt, average, dBi 0 ° | 16.2; 5 ° | 16.5; 10 ° | 16.4 0 ° | 16.6; 5 ° | 17.0; 10 ° | 16.9 0 ° | 16.9; 5 ° | 17.2; 10 ° | 17.1 2 ° | 15.3; 7 ° | 15.8;12 ° | 15.4 2 ° | 15.2; 7 ° | 15.7;12 ° | 15.3 2 ° | 16.2; 7 ° | 16.4;12 ° | 16.2 2 ° | 16.7; 7 ° | 17.1;12 ° | 16.8 2 ° | 16.9; 7 ° | 17.3;12 ° | 16.9
Beamwidth, Horizontal Tolerance, degrees ±1.1 ±1.2 ±0.8 ±16.1 ±10.8 ±3.5 ±2.2 ±4.4
Beamwidth, Vertical Tolerance, degrees ±0.5 ±0.4 ±0.3 ±0.4 ±0.2 ±0.6 ±0.5 ±0.4
USLS, beampeak to 20° above beampeak, dB 16 18 18 14 14 16 17 14
Front-to-Back Total Power at 180° ± 30°, dB 26 26 26 24 24 27 27 26
CPR at Boresight, dB 19 21 21 16 16 21 21 19
CPR at Sector, dB 13 12 13 10 11 10 12 8

Electrical Specifications, Broadcast 65

Frequency Band, MHz 694–790 790–890 890–960 2300–2500 2490–2690 1695–1920 1920–2200 2300–2690
Gain, dBi 17.2 17.1
Beamwidth, Horizontal, degrees 62 62
Beamwidth, Horizontal Tolerance, degrees ±3.4 ±3.7
Beamwidth, Vertical, degrees 5.7 5.3
Beamwidth, Vertical Tolerance, degrees ±0.4 ±0.2
USLS (First Lobe), dB 17 17

Electrical Specifications, Service Beam

Frequency Band, MHz 694–790 790–890 890–960 2300–2500 2490–2690 1695–1920 1920–2200 2300–2690
Steered 0° Gain, dBi 21.3 21.2
Steered 0° Gain Tolerance, dBi ±0.4 ±0.5
Steered 0° Beamwidth, Horizontal, degrees 26 25
Steered 0° CPR over 10 dB Beamwidth, dB 18 19
Steered 0° Horizontal Sidelobe, dB 13 11
Steered 30° Gain, dBi 20.6 20.5
Steered 30° Gain Tolerance, dBi ±0.4 ±0.6
Steered 30° Beamwidth, Horizontal, degrees 27 26
Steered 30° CPR over 10 dB Beamwidth, dB 13 13

Electrical Specifications, Soft Split

Frequency Band, MHz 694–790 790–890 890–960 2300–2500 2490–2690 1695–1920 1920–2200 2300–2690
Gain, dBi 20.3 20.3
Beamwidth, Horizontal, degrees 31 30
Horizontal Sidelobe, dB 21 19

Mechanical Specifications

Wind Loading at Velocity, frontal 109.7 lbf @ 150 km/h | 477.0 N @ 150 km/h
Wind Loading at Velocity, lateral 409.0 N @ 150 km/h | 91.9 lbf @ 150 km/h
Wind Loading at Velocity, maximum 1,010.0 N @ 150 km/h | 227.1 lbf @ 150 km/h
Wind Speed, maximum 241 km/h | 149.75 mph

Packaging and Weights

Width, packed 460 mm | 18.11 in
Depth, packed 350 mm | 13.78 in
Length, packed 2830 mm | 111.417 in
Net Weight, without mounting kit 37.8 kg | 83.335 lb
Weight, gross 51.8 kg | 114.199 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
Other Ways to Browse

Browse by Application

Browse by Application