Warning Icon

For other alternatives, please contact us for more information.

0 Replacement products available

NHH-33A-R2B

6-port sector antenna, 2x 698–896 and 4x 1695–2360 MHz, 33° HPBW, 2x RETs and 2x SBTs
Specifications
Finish making your selections or clear them to view relevant specifications.
How to Buy
Features and Benefits
  • Narrow beamwidth capacity antenna for higher level of densification and enhanced data throughput
  • Internal SBT on low and high band allow remote RET control from the radio over the RF jumper cable
  • Separate RS-485 RET input/output for low and high band
  • One LB RET and one HB RET. Both high bands are controlled by one RET to ensure same tilt level for 4x Rx or 4x MIMO
Specifications

Electrical Specifications

Frequency Band, MHz 698–806 806–896 1695–1880 1850–1990 1920–2200 2300–2360
Gain, dBi 15.7 16.3 18.0 18.2 18.6 19.4
Beamwidth, Horizontal, degrees 34 30 34 33 31 29
Beamwidth, Vertical, degrees 21.5 19 8.6 8 7.5 6.7
Beam Tilt, degrees 0–18 0–18 0–10 0–10 0–10 0–10
USLS (First Lobe), dB 20 17 15 15 15 15
Front-to-Back Ratio at 180°, dB 33 38 36 37 36 38
Isolation, Cross Polarization, dB 25 25 25 25 25 25
Isolation, Inter-band, dB 28 28 28 28 28 28
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153 -153
Input Power per Port at 50°C, maximum, watts 300 300 250 250 250 200

Electrical Specifications, BASTA

Frequency Band, MHz 698–806 806–896 1695–1880 1850–1990 1920–2200 2300–2360
Gain by all Beam Tilts, average, dBi 15.3 16.1 17.4 17.9 18.2 19.0
Gain by all Beam Tilts Tolerance, dB ±0.4 ±0.3 ±0.7 ±0.5 ±0.7 ±0.6
Gain by Beam Tilt, average, dBi 18 ° | 15.1
9 ° | 15.4
0 ° | 15.3
18 ° | 15.9
9 ° | 16.1
0 ° | 16.0
10 ° | 17.6
5 ° | 17.4
0 ° | 16.9
10 ° | 18.1
5 ° | 17.9
0 ° | 17.4
10 ° | 18.5
5 ° | 18.3
0 ° | 17.6
10 ° | 19.2
5 ° | 19.1
0 ° | 18.3
Beamwidth, Horizontal Tolerance, degrees ±2.3 ±1 ±1.5 ±1.6 ±1.3 ±0.9
Beamwidth, Vertical Tolerance, degrees ±1.6 ±0.7 ±0.5 ±0.3 ±0.5 ±0.3
USLS, beampeak to 20° above beampeak, dB 15 15 15 15
Front-to-Back Total Power at 180° ± 30°, dB 25 26 30 30 29 30
CPR at Boresight, dB 21 21 18 20 19 18
CPR at Sector, dB 13 9 11 11 12 11

General Specifications

Antenna Type Sector
Polarization ±45°
Band Multiband
Color Light gray
Effective Projective Area (EPA), frontal 0.47 m² | 5.059 ft²
Effective Projective Area (EPA), lateral 0.15 m² | 1.615 ft²
Grounding Type RF connector body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 4
RF Connector Quantity, low band 2
RF Connector Quantity, total 6

Remote Electrical Tilt (RET) Information, General

RET Interface 8-pin DIN Male | 8-pin DIN Female
RET Interface, quantity 2 male | 2 female

Dimensions

Width 640 mm | 25.197 in
Length 1219 mm | 47.992 in
Depth 235 mm | 9.252 in

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 698 – 896 MHz | 1695 – 2360 MHz
Total Input Power, maximum 900 W @ 50 °C

Remote Electrical Tilt (RET) Information, Electrical

Protocol 3GPP/AISG 2.0 (Single RET)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 10 W
Input Voltage 10–30 Vdc
Internal Bias Tee Port 3 | Port 1
Internal RET High band (1) | Low band (1)

Material Specifications

Radiator Material Low loss circuit board | Aluminum
Radome Material Fiberglass, UV resistant
Reflector Material Aluminum

Mechanical Specifications

Wind Loading at Velocity, frontal 113.5 lbf @ 150 km/h | 503.0 N @ 150 km/h
Wind Loading at Velocity, lateral 34.8 lbf @ 150 km/h | 155.0 N @ 150 km/h
Wind Loading at Velocity, maximum 685.0 N @ 50 km/h | 154.0 lbf @ 50 km/h
Wind Speed, maximum 241 km/h | 149.75 mph

Packaging and Weights

Width, packed 797 mm | 31.378 in
Depth, packed 402 mm | 15.827 in
Length, packed 1370 mm | 53.937 in
Net Weight, without mounting kit 33 kg | 72.752 lb
Weight, gross 50 kg | 110.231 lb

Array Layout

Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 ISO 9001:2015Designed, manufactured and/or distributed under this quality management system

Electrical Specifications

Frequency Band, MHz 698–806 806–896 1695–1880 1850–1990 1920–2200 2300–2360
Gain, dBi 15.7 16.3 18.0 18.2 18.6 19.4
Beamwidth, Horizontal, degrees 34 30 34 33 31 29
Beamwidth, Vertical, degrees 21.5 19 8.6 8 7.5 6.7
Beam Tilt, degrees 0–18 0–18 0–10 0–10 0–10 0–10
USLS (First Lobe), dB 20 17 15 15 15 15
Front-to-Back Ratio at 180°, dB 33 38 36 37 36 38
Isolation, Cross Polarization, dB 25 25 25 25 25 25
Isolation, Inter-band, dB 28 28 28 28 28 28
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153 -153
Input Power per Port at 50°C, maximum, watts 300 300 250 250 250 200

Electrical Specifications, BASTA

Frequency Band, MHz 698–806 806–896 1695–1880 1850–1990 1920–2200 2300–2360
Gain by all Beam Tilts, average, dBi 15.3 16.1 17.4 17.9 18.2 19.0
Gain by all Beam Tilts Tolerance, dB ±0.4 ±0.3 ±0.7 ±0.5 ±0.7 ±0.6
Gain by Beam Tilt, average, dBi 18 ° | 15.1; 9 ° | 15.4;0 ° | 15.3 18 ° | 15.9; 9 ° | 16.1;0 ° | 16.0 10 ° | 17.6; 5 ° | 17.4;0 ° | 16.9 10 ° | 18.1; 5 ° | 17.9;0 ° | 17.4 10 ° | 18.5; 5 ° | 18.3;0 ° | 17.6 10 ° | 19.2; 5 ° | 19.1;0 ° | 18.3
Beamwidth, Horizontal Tolerance, degrees ±2.3 ±1 ±1.5 ±1.6 ±1.3 ±0.9
Beamwidth, Vertical Tolerance, degrees ±1.6 ±0.7 ±0.5 ±0.3 ±0.5 ±0.3
USLS, beampeak to 20° above beampeak, dB 15 15 15 15
Front-to-Back Total Power at 180° ± 30°, dB 25 26 30 30 29 30
CPR at Boresight, dB 21 21 18 20 19 18
CPR at Sector, dB 13 9 11 11 12 11

General Specifications

Antenna Type Sector
Polarization ±45°
Band Multiband
Color Light gray
Effective Projective Area (EPA), frontal 0.47 m² | 5.059 ft²
Effective Projective Area (EPA), lateral 0.15 m² | 1.615 ft²
Grounding Type RF connector body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 4
RF Connector Quantity, low band 2
RF Connector Quantity, total 6

Remote Electrical Tilt (RET) Information, General

RET Interface 8-pin DIN Male | 8-pin DIN Female
RET Interface, quantity 2 male | 2 female

Dimensions

Width 640 mm | 25.197 in
Length 1219 mm | 47.992 in
Depth 235 mm | 9.252 in

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 698 – 896 MHz | 1695 – 2360 MHz
Total Input Power, maximum 900 W @ 50 °C

Remote Electrical Tilt (RET) Information, Electrical

Protocol 3GPP/AISG 2.0 (Single RET)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 10 W
Input Voltage 10–30 Vdc
Internal Bias Tee Port 3 | Port 1
Internal RET High band (1) | Low band (1)

Material Specifications

Radiator Material Low loss circuit board | Aluminum
Radome Material Fiberglass, UV resistant
Reflector Material Aluminum

Mechanical Specifications

Wind Loading at Velocity, frontal 113.5 lbf @ 150 km/h | 503.0 N @ 150 km/h
Wind Loading at Velocity, lateral 34.8 lbf @ 150 km/h | 155.0 N @ 150 km/h
Wind Loading at Velocity, maximum 685.0 N @ 50 km/h | 154.0 lbf @ 50 km/h
Wind Speed, maximum 241 km/h | 149.75 mph

Packaging and Weights

Width, packed 797 mm | 31.378 in
Depth, packed 402 mm | 15.827 in
Length, packed 1370 mm | 53.937 in
Net Weight, without mounting kit 33 kg | 72.752 lb
Weight, gross 50 kg | 110.231 lb
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 ISO 9001:2015Designed, manufactured and/or distributed under this quality management system
Documentation & Downloads

Environment Health and Safety

Installation Instruction

Product Information

Product Specification

Product Specification (Comprehensive)

Warranty

Other Ways to Browse